Home › Don Parkes › Comments
Howdy, Stranger!
It looks like you're new here. If you want to get involved, click one of these buttons!
Don Parkes
About
- Username
- Don Parkes
- Joined
- Visits
- 1
- Last Active
- Roles
- Member
Comments
-
Thanks Adam. I guess that's good news/bad news. :) At least it wasn't walking noise like my last image when I was set to dither every 20 frames!
-
Will do! Issue is clearly in upper right/lower left from the smudge evident on the flat. Attached integrated image with a simple nuke stretch + a raw and calibrated sub + the master flat. There's also a fairly strong gradient upper right/lower left …
-
Adam, thanks for digging into this. I'll report back if I give this method a go.
-
Threw a few subs up, hopefully this link works: https://drive.google.com/drive/folders/1hfgf_fnt-wFLkTGXbXHPVLv_socefQM_?usp=sharing - I ran these using pretty aggressive ESD integration settings and still trails. - You were right, WSC rejection alg…
-
Adam, thanks for the syfy link (Phil is a "neighbor" of mine). What you were able to do with M42 gives me hope but I'm minor league with my processing abilities. Trying different tolerances + large scale redux but still not quite there. Would love…
-
To avoid a new thread as I'm experiencing a similar issue, just can't get all the trails out. Adam, as you pointed out on YT the witch head is in a heavily trafficked part of the sky and I'm getting blitzed by trails in over 90% of my subs. I'm usin…