Howdy, Stranger!
It looks like you're new here. If you want to get involved, click one of these buttons!
Mossyback
About
- Username
- Mossyback
- Joined
- Visits
- 83
- Last Active
- Roles
- Member
Comments
-
Thanks, Adam. I will continue to work on it. Hank
-
Yes I do and that makes two of us. I don't understand how I could have made such a stupid mistake. I went back to channel combination and now the Blue channel isn't there. I'm not sure to which point I'll have to go back to in order to rectify this.…
-
Also:
-
Hi Adam, I went back and read your article on LRGB/RGB combination and I think I now understand what you are saying.Before we go any further, I took my two images and followed your instructions and I believe it worked. (See screen shot below). If th…
-
Maybe my solution is to take up basket weaving. I would probably be less expensive. ;-)
-
"This is not the usage I suspect you want." What I would like to do is end up with my LRGB image. I thought that putting these two together with Pixel Math was the way to proceed, but apparently not. If I try LRGB combination, that doesn't work. I s…
-
Hi Adam, This is driving me crazy. I just set up the pixel math screen to send to you and I first applied it to my images. Now nothing happens - no response from PI except the RGB image goes grey. Hank
-
Thanks, Adam. Got it!
-
Thanks for pointing out what the problem might be. I’ll process the data again.
-
Sorry, I sent the wrong one.
-
Here are the two images.
-
I went back and reviewed your videos on STF and HT. It was worth the effort as I now have a better understanding as to how they work and why. So, I've gone back and re-worked both the RGB and Luminance images in HT. They are now both non-linear. Aga…
-
Thanks, Adam. Although the subs looked good before I started processing, looking at the calibrated files proved otherwise. They really are junk! Out of curiosity, I’m now going to look at the log text file and see what it has to tell me. Hank
-
Thanks for the suggestion. Since there are four work spaces I could have that many trials. Hank
-
It’s interesting that WBPP chose this setting. I selected “Auto” as suggested in the Fundamentals video. I went back and checked to be sure that’s what I’d done. I have 20 subs each for LRGB. Should I select GESD next time under similar conditions r…
-
Hi Adam, Dumb mistake #47. ;-) I didn't have Image Registration and Image Integration checked. I just ran WBPP and everything turned out as it should. Thanks for the help. Hank
-
Sorry, Adam, I didn’t express myself very well. Under “Masters”, I have Master Bias, Master Darks, and Master Flats. What I don’t have is any Master Lights. Hank