Howdy, Stranger!
It looks like you're new here. If you want to get involved, click one of these buttons!
Mark Marfoglia
About
- Username
- Mark Marfoglia
- Joined
- Visits
- 4
- Last Active
- Roles
- Member
Comments
-
It worked!I was able to get a much better background. However, I am still getting a "negative or insignificant values" warning. I remember your Adam Block method of lighting up the zeros but cannot find it amongst the treasure trove of videos...Many…
-
My bad! This is a new mobile rig for me, and I am trying NINA. NINA read my camera driver gain setting of 42, but not the offset of 76, and assumed 0 offset. I think this means that my data was in effect clipped, both light and darks. I checked rand…
-
Here is a link. Let me know if you want the whole project of 39 images, for this on any tutorial you may want to prepare. https://can01.safelinks.protection.outlook.com/?url=https://wetransfer.com/downloads/d59df50694f46eb7436fafb060cdf7082025030920…
-
Adam,I ran it as you suggested and everything is fine, phew! Now I have several 10 panel mosaics, with a QHY600/644mm fl to process!! Lots and lots of stars.Many thanks,Mark
-
Adam,I am still in Chili with limited means of communication, but I tried to split the channels and my weirdness exists in all 3 channels. I am returning home soon, and will spend more time on the problem. I did a manual integration with Image Integ…
-
My mobile laptop driver settings did not have “remove overscan” selected. I doubt this could have an effect because the same setting was used for both calibration and lights. Am I correct in assuming that?
-
That makes sense. I just have to figure out why my darks are “crappy”.Many thanks.
-
All the raw data is available thru the link in my original post if necessary. I did find your video on creating the defect map and that’s the technique I used to create mine. You have quite a library now, congrats. The search tool is a must and work…
-
I carefully modelled the bright columns the best I could, but it did not work. I have attached the defect map. I did notice that what shows in the image is more the dark bands rather than the bright ones. I will try to model them instead and try aga…
-
Many thx. I will give it a try.