Adam,
As usual - thanks for the reply and all the detail.
The image blend course would be fantastic sir !!
I meant to include the links to the two images I posted in CN. https://www.cloudynights.com/topic/965961-first-nb-image-ngc-281-pacman-and-b…
Hey Adam and Joe,
Very interesting to read Joe's question and your response.
After working thru most of the NB videos, your response made even more sense. I still keep digging thru some posts in the other forums (mainly CN) on the luminance to OSC …
Adam,
Your explanation certainly makes sense.
There are several threads in the PI forum and Cloudy Nights from folks that claimed it was not an issue.
I'm going to talk with "my CFO" and see if we can make this transition fit without the filter wh…
Adam,
I have watched the 10 videos in the section you linked on NSG. Those really cleared up a lot of things regarding NSG. I started with the oldest videos you did and worked my way up.
I did not realize that there was such a large amount of additi…
Adam,
As much as I stared at those screens yesterday (lol) - I still missed it. Thank you for pointing it out.
I will go read the article. To be honest I've been so focused on the getting thru the videos in Fundamentals, I have not explored some o…
Adam,
This is why my content stresses the explanation of parameters and concepts over monkey-see-monkey-does approaches.
Amen!When I hit it fresh this morning and started digging into the data deeper as I should have done- it all fell into place.
…
Adam,
Good morning!
The data I was working with initially was from Video 54 in the Fundamentals List -
"54. LDN 183 WORKFLOW (You now know enough to follow along in a *real* Workflow session.) Screen shot is attached."
I did get the Astrometric so…
Just to clarify - not sure it makes a difference, but the data I was using was from the Fundamentals section, NOT the Fundamental Workflow Examples.
Rich
Adam,
Thanks for the reply.
I was mainly concerned about the number of hot pixels. I did not realize (or missed it if you mentioned it) that the camera sensor you were referring to was a CCD. I have really come to enjoy imaging with the ASI2600 - w…
Adam,
Thanks for the followup - I got the information from Russ' site. Need to do a little more digging on it. If I understand getting it setup also means loading the CUDA toolkit from NVIDA's site - correct ?
Something else to learn - but I'm reall…
Adam,
First off - I apologize for the confusing short-hand referral to the video. It was the fourth in the series working with the images of NC1491. The title was BXT(Correct Only), DBE and SPCC.
The M16 image was Linear - I had already checked that…
Yesterday I got the ASI071 out of its case and fired it up in NINA to see if it still worked. After a little fumbling with getting the drivers right, it fired up and cooled down quite nicely to 0 C.
Gave the ASI a workout over night. Using the NINA …
Thanks for the reply......a lot to think about.
I started with the DLSR simply because I had one - a 5D Mk3. I knew of some of the limitations using a DSLR. The Ra seemed liked a good next step in lieu of getting the glass filter in front of the sen…