Howdy, Stranger!

It looks like you're new here. If you want to get involved, click one of these buttons!

Elvie

About

Username
Elvie
Joined
Visits
17
Last Active
Roles
Member

Comments

  • Success ==> probe size = 1 BIG thank you.
  • Probably quite system specific. Perhaps someone else will have a similar problem and a common thread will appear. Hopefully the root cause is not an issue that will surface in other ways to the detriment of any image processing. Thanks for your time…
  • Thanks for passing it on Adam.  Pardon the niggle but I have been around the block (no pun intended) with this a few times and have tested things a few different ways. I have fixed the niggle with no effect on outcome. Funny (not really) part is I g…
  • Hi Adam - as suggested - a recording of the steps. Would you mind reviewing the video - only a minute long - perhaps you will spot the error of my ways. https://www.dropbox.com/s/qowav1zwfqxwxze/Pedestal.mov?dl=0 Tx for sticking with this.
  • Sure - see attached. FYI I calibrated some images with a pedestal of 100 and it removed 99.9% of the red pixels - so working as predicted despite my weird PM results. Also test integrated an Ha stack of 30 x 300s calibrated with pedestal 100 and usi…
  • Hi Adam. In your 3rd capture above you show a zero value for a specific pixel location. I have done a simple PM light minus dark subtraction using the dropbox'ed images that I forwarded to you and I do not get a zero value for that specific pixel lo…
  • Thanks Adam - glad that it has worked for you - seriously. I am at a loss to explain my problem. I will follow along wit the video again to see where I have lost my way. Keep you posted. Thanks again for taking the time too explore this.
  • Hi Adam. The link below is to a shared dropbox folder: Ha sub and Master Dark.  Captures were with NINA. The RGB conversion was via menu:  Image / Color Spaces https://www.dropbox.com/sh/fkkf6soumugycbk/AAB7o3PRi-MCIArFqox5rpZOa?dl=0 Tx 
  • Hi Adam.  Yes - no doubt I have made some very silly mistake and need to be shown the light. Here is the screen shot you requested. Tx.