›

Help with selecting the QE Curve in SPCC for ASI 1600mm Pro camera

Joseph Hunt
in PixInsight
Hello,

I can't seem to find the a reference anywhere that speaks to the current QE Curve setting to use in SPCC for those using the ASI 1600mm Pro Camera.  Since shooting Mono, I'm guessing the Ideal Curve is the wrong selection?  Any help is greatly appreciated.

Thanks

Comments

  • Ray Hansen
    I think ZWO used a Panasonic MN34230  in these, but you could message Sam to confirm. You might also leave this in the Pixinsight forum. There may be a quicker answer there.
  • Joseph Hunt
    Thanks Ray.  I'll take a look a the PI Forum.
  • John Sim
    I defined a curve for this camera and it can be imported into PixInsight using the FilterManager process. I couldn't attach the file with a csv extension so it has been changed to .txt and you may need to revert it to .csv before importing into PI.
    txt
    txt
    Panasonic-MN34230.txt
    486B
  • Joseph Hunt
    Thank you John.  I'm fairly new to Pixinsight.  Any chance you can point me to a link that gos over how to do this in filter manager?  I'll take a look and see what I can come up with as well.

    Thanks again
Sign In or Register to comment.