›

FastTrack PixinSight Tutorial - WBPP

Jeff Hullin
in PixInsight
Hi,

I'm new to Pixinsight...trying to run exercise in the WBPP tutorial. It fails with the following log messages (the light frames are loaded:

Master Dark manually disabled.

 Master bias: C:/Users/jtask/Pictures/PixInsight Training  Fast Track/Fast Track/master/masterBias_BIN-1.xisf
 Master dark: none
 Master flat: none
*** Warning: Image Calibration failed.
!!! Error: Flat frames calibration failed.
****************************************************************


******************** LIGHT FRAMES CALIBRATION ********************
Group of 32 Light frames (32 active)
BINNING  : 1
Filter   : NoFilter
Exposure : 300.00s
Keywords : []
Mode     : pre-processing
Color    : CFA/RGB

Master Dark automatic match.
Master Flat automatic match.

 Master bias: none
 Master dark: C:/Users/jtask/Pictures/PixInsight Training  Fast Track/Fast Track/master/masterDark_BIN-1_EXPOSURE-300.00s.xisf
 Master flat: C:/Users/jtask/Pictures/PixInsight Training  Fast Track/Fast Track/Flats/2021-03-29_20-05-38__-10.10_3.43s_0000.fits
Light Output Pedestal: 0
*** Warning: Image Calibration failed.
!!! Error: Light frames calibration failed.
******************************************************************


******************** COSMETIZATION / DEBAYERING ********************
Group of 32 Light frames (0 active)
BINNING  : 1
Filter   : NoFilter
Exposure : 300.00s
Keywords : []
Mode     : pre-processing
Color    : CFA/RGB

*** Warning: No active frames.
********************************************************************


Demosaicing with pattern: RGGB
!!! Error: No active light frames in the group.
********************************************************************
Can anyone advise where I've gone astray?

Regards,

Jeff

Comments

  • BlockHeadBlockHead
    HI,

    It does not appear that you loaded the darks frames.
    Can you attach a screenshot of your WBPP configuration?

    -the Blockhead
  • BlockHeadBlockHead
    Another thing... when you run into a problem like this. I would reccomend that you delete ALL output files and start again fresh. This is a good exercise that will weed out small errors. Once you have output files and you try to run things again...it is introduce other errors that are not really part of the problem.

    (So delete all of the folders that WBPP made...and start from the RAW files until you get it right.)

    -the Blockhead
  • Jeff Hullin
    Hi,

    Thanks for your assistance, I've attached a screenshot of WBPP.

    Jeff 
    WBPP Tutorial.PNG
    1367 x 749 - 71K
  • BlockHeadBlockHead
    Hi Jeff,

    In your calibration settings, you have the box for "Dark" unchecked. 
    That is why there is a red "NO" symbol in the Darks column for your lights. 

    -the Blockhead
  • Jeff Hullin
    Hi,

    Thanks, worked through the previous issue...it appears I confused the order of things during the discussion of different sensors.

    Everything progress smoothly until PCC color correction...I do have the databases installed, the panel is configured as per the tutorial.

    Thanks,
    Jeff 

    image
    PCC_Error.PNG
    1001 x 610 - 514K
  • BlockHeadBlockHead
    edited December 2021
    Hi Jeff,

    You may have done the same thing as James did on this forum a few days ago?
    Please check to make certain all GAIA files are installed..that would be a good screenshot.

    -the Blockhead
Sign In or Register to comment.